Engineering, 07.08.2019 04:30 morganhines181

Ametal plate (k=180 w/m-k, p-=2800 kg/m, and cp=880 j/kg k) with a thickness of 1 cm is being cooled by air at 5°c with a convection heat transfer coefficient of 30 w/m^2 k. if the initial temperature of the plate is 300°c, determine the plate temperature gradient at the surface after 3 minutes of cooling. hint: use the lumped system analysis to calculate the plate surface temperature. make sure to verify the application of this method to this problem

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, aliceohern

The y form of iron is known as: a) ferrite b) cementite c) perlite d) austenite

Answers: 3

continue

Engineering, 04.07.2019 18:10, mm016281

What difference(s) did you notice using a pneumatic circuit over hydraulic circuit. explain why the pneumatic piston stumbles when it hits an obstacle.

Answers: 2

continue

Engineering, 04.07.2019 18:10, johnthienann58

Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented

Answers: 2

continue

Engineering, 04.07.2019 18:10, Strick1530

Which of the following components of a pid controlled accumulates the error over time and responds to system error after the error has been accumulated? a)- proportional b)- derivative c)- integral d)- on/off.

Answers: 2

continue

You know the right answer?

Ametal plate (k=180 w/m-k, p-=2800 kg/m, and cp=880 j/kg k) with a thickness of 1 cm is being cooled...