Engineering, 06.08.2019 04:10 tamya12234

The sinusodial modulating wave m(t) = (am)cos(2pifmt) is applied to a phase modulator with sensitivity kp. the unmodulated carrier wave has frequency fc and amplitude ac. determine the spectrum of the resulting phase-modulated wave, assuming that the maximum phase deviation b = kpam does not exceed 0.3 radian.
also, by assuming bp is less than equal to 0.3 rad, you can approximate cos[bpcos(2pifmt)] = 1.0 and
sin[bpcos(2pifmt) = bmsin(2pifmt)
also need the specturm s(f) base on above appoximation.

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 15:10, breannaasmith1122

Two flowing streams of argon gas are adiabatically mixed to form a single flow/stream. one stream is 1.5 kg/s at 400 kpa and 200 c while the second stream is 2kg/s at 500 kpa and 100 ? . it is stated that the exit state of the mixed single flow of argon gas is 150 c and 300 kpa. assuming there is no work output or input during the mixing process, does this process violate either the first or the second law or both? explain and state all your assumptions.

Answers: 1

continue

Engineering, 04.07.2019 18:10, niicoleassssssf

Aflywheel accelerates for 5 seconds at 2 rad/s2 from a speed of 20 rpm. determine the total number of revolutions of the flywheel during the period of its acceleration. a.5.65 b.8.43 c. 723 d.6.86

Answers: 2

continue

Engineering, 04.07.2019 18:10, qwertylol12345

Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.

Answers: 2

continue

Engineering, 04.07.2019 18:10, michellerosas

Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.

Answers: 3

continue

You know the right answer?

The sinusodial modulating wave m(t) = (am)cos(2*pi*fm*t) is applied to a phase modulator with sensit...