Two oil tanks are connected by two 9-m-long pipes, as in fig. p6.26. pipe 1 is 5 cm in diameter and is 6 m higher than pipe 2. it is found that the flow rate in pipe 2 is twice as large as the flow in pipe 1. (a) what is the diameter of pipe 2? (b) are both pipe flows laminar? (c) what is the flow rate in pipe 2 (m3/s)? neglect minor losses.

An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)

Items are similar to the free issue items, but their access is limited. (clo5) a)-bin stock items free issue b)-bin stock controlled issue c)-critical or insurance spares d)-rebuildable spares e)-consumables

Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.