subject
Engineering, 02.08.2019 19:20 lovly8914

A4-m-high and 6-m-wide wall consists of a long 18-cm×30-cm cross section of horizontal bricks (k=0.72w/m°c) separated by 3-cm-thick plaster layers (k=0.22w/m°c). there are also 2-cm-thick plaster layers on each side of the wall, and a 2-cm-thick rigid foam (k=0.026w/m°c) on the inner side of the wall. the indoor and the outdoor temperatures are 22°c and -4°c, and the convection heat transfer coefficients on the inner and the outer sides are h1=10w/m^2°c and h2=20w/m^2°c, respectively. assuming onedimensional heat transfer and disregarding radiation, determine the rate of heat transfer through the wall.

ansver
Answers: 3

Other questions on the subject: Engineering

image
Engineering, 03.07.2019 14:10, cowgyrlup124
Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.
Answers: 1
image
Engineering, 03.07.2019 14:10, kayabwaller4589
When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point
Answers: 3
image
Engineering, 03.07.2019 19:30, 10040813
When using the ohmmeter function of a digital multimeter, the leads are placed in what position relative to the component being tested? a. parallel b. control c. series d. line
Answers: 3
image
Engineering, 04.07.2019 03:10, lauriepdx17
What precautions should you take to prevent injuries when dealing with heavy loads?
Answers: 1
You know the right answer?
A4-m-high and 6-m-wide wall consists of a long 18-cm×30-cm cross section of horizontal bricks (k=0.7...

Questions in other subjects:

Konu
Geography, 12.12.2020 16:00
Konu
Chemistry, 12.12.2020 16:00
Konu
Mathematics, 12.12.2020 16:00