Engineering, 26.07.2019 19:30 oaaliyah505

Acompressed-air drill requires an air supply of 0.25 kg/s at gauge pressure of 650 kpa at the drill. the hose from the air compressor to the drill has a 40 mm diameter and is smooth. the maximum compressor discharge gauge pressure is 690 kpa. neglect changes in air density and any effects of hose curvature. air leaves the compressor at 40° c. what is the longest hose that can be used?

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, cowgyrlup124

Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.

Answers: 1

continue

Engineering, 04.07.2019 18:10, viicborella

Steel is coated with a thin layer of ceramic to protect against corrosion. what do you expect to happen to the coating when the temperature of the steel is increased significantly? explain.

Answers: 1

continue

Engineering, 04.07.2019 18:10, siri5645

At 12 noon, the count in a bacteria culture was 400; at 4: 00 pm the count was 1200 let p(t) denote the bacteria cou population growth law. find: (a) an expression for the bacteria count at any time t (b) the bacteria count at 10 am. (c) the time required for the bacteria count to reach 1800.

Answers: 1

continue

Engineering, 04.07.2019 18:10, katelynn73

Atmospheric air has a temperature (dry bulb) of 80° f and a wet bulb temperature of 60° f when the barometric pressure is 14.696 psia. determine the specific humidity, grains/lb dry air. a. 11.4 c. 55.8 d. 22.5 b. 44.1

Answers: 1

continue

You know the right answer?

Acompressed-air drill requires an air supply of 0.25 kg/s at gauge pressure of 650 kpa at the drill....