A20 mm deep slot is being milled in a block of aluminum with k 850 n/mm2. the tool is 25 mm in diameter, and has 2 teeth. it is rotating at 14,728 rpm, and the chip load (feed per tooth) is 0.1 mm. how much power is consumed in kw?

Acompressor receives the shaft work to decrease the pressure of the fluid. a)- true b)- false

Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk

An electric kettle is made out of stainless steel, weighs two pounds (when empty) and is equipped with a heating element that consumes 2 kw of electricity. assuming that the water and the kettle are at the same uniform temperature at any moment of time, calculate the shortest possible time to bring 2 quarts of water from room temperature to the onset of boiling