Engineering, 26.07.2019 17:30 ethanboshears15

Agasoline engine operating on an ideal otto cycle has a compression ratio of 11. air enters the engine at 100 kpa, 37 c. the maximum temperature during the cycle is 1700 k·treat the working fluid as air and use variable specific heats , determine: (a) the amount of heat transfer per unit mass of the working fluid during the heat addition process (b) the thermal efficiency of the engine, (c) the mean effective pressure for this cycle. (d) show this cycle on p-v and t-s diagrams.

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 15:10, EmilySerna

Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.

Answers: 1

continue

Engineering, 03.07.2019 19:30, 10040813

When using the ohmmeter function of a digital multimeter, the leads are placed in what position relative to the component being tested? a. parallel b. control c. series d. line

Answers: 3

continue

Engineering, 04.07.2019 18:10, niicoleassssssf

Aflywheel accelerates for 5 seconds at 2 rad/s2 from a speed of 20 rpm. determine the total number of revolutions of the flywheel during the period of its acceleration. a.5.65 b.8.43 c. 723 d.6.86

Answers: 2

continue

Engineering, 04.07.2019 18:10, redrosesxx

Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux

Answers: 3

continue

You know the right answer?

Agasoline engine operating on an ideal otto cycle has a compression ratio of 11. air enters the engi...