Engineering, 26.07.2019 17:10 jamaal97
Find the rim tension and the bending stress in the rim of a flywheel, the section ofwhich is rectangular, 30 cm wide and 15 cm thick and mean diameter 240 cm. it runs at 300 rp. m. and has 6 arms. assume that owing to stretch ofthe arms the bending stress in the rim segment is 2/3 rd of the value obtained on the assumption that the rim segments are straight built in beams. p=7800kg/m^3
Answers: 2
Engineering, 04.07.2019 18:10, bckyanne3
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
Engineering, 04.07.2019 18:10, QueenLife4869
Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.
Answers: 3
Find the rim tension and the bending stress in the rim of a flywheel, the section ofwhich is rectang...
Mathematics, 21.08.2021 14:00
English, 21.08.2021 14:00
Social Studies, 21.08.2021 14:00
Mathematics, 21.08.2021 14:00
Biology, 21.08.2021 14:00
Social Studies, 21.08.2021 14:00
Mathematics, 21.08.2021 14:00