Engineering, 26.07.2019 17:10 darthshot4

Ahydroelectric facility has an upstream reservoir elevation of 110 m and a downstream river elevation of 85 m. the river can be taken as having a velocity of 1 m/s. the head loss, hloss, through the tunnel leading to and from the turbine is given by hoss0.082602, where hoss is in meters and q is the volumetric flow rate in rnys. the efficiency of the turbine is 80%. determine q through the turbine that is required to generate 1 mw of power.

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 16:10, Arealbot

The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.

Answers: 1

continue

Engineering, 04.07.2019 18:10, chadatkin

Which of the following ziegler nichols tuning methods the response of the controller to a step input should exhibit an s-shaped curve? a)-open loop mode b)-closed loop mode c)-both modes (open & closed) d)-none of the modes (open & closed)

Answers: 3

continue

Engineering, 04.07.2019 18:20, rjone8429

Asimple rankine cycle uses water as the working fluid. the water enters the turbine at 10 mpa and 480c while the condenser operates at 6 kpa. if the turbine has an isentropic efficiency of 80 percent while the pump has an isentropic efficiency of 70 percent determine the thermal efficiency

Answers: 1

continue

Engineering, 04.07.2019 18:20, sanchez626

Aheavily insulated piston-cylinder device contains 0.02 m3 of steam at 300 kpa and 200 °c. 1.2 mpa. d this process. team is now compressed in a reversible manner to a pressure of etermine the entropy change and the work done on the steam during this process

Answers: 1

continue

You know the right answer?

Ahydroelectric facility has an upstream reservoir elevation of 110 m and a downstream river elevatio...