Ametal column of external diameter 300 mm and thickness 20 mm carries a load of 400 kn at an eccentricity of 50 mm. determine the maximum and minimum stresses in the column if its length is 5 m, and both ends of the column are fixed. e 95 gpa.

Two flowing streams of argon gas are adiabatically mixed to form a single flow/stream. one stream is 1.5 kg/s at 400 kpa and 200 c while the second stream is 2kg/s at 500 kpa and 100 ? . it is stated that the exit state of the mixed single flow of argon gas is 150 c and 300 kpa. assuming there is no work output or input during the mixing process, does this process violate either the first or the second law or both? explain and state all your assumptions.

The higher the astm grain size number, the finer the gran is. a)-true b)-false

An engine runs on the ideal diesel cycle. the cycle has a compression ratio of 20 and a cutoff ratio of 2. the highest temperature in the cycle is 1200 k. if the heat into the system is 300 kj/kg of working fluid and using variable specific heats determine the work produced per mass of working fluid