subject
Engineering, 26.07.2019 16:10 bluetigerbird2117

Alocal dairy farmer has a water tank (much like a water tower) on her farm to hold drinking water for her dairy cows. rain water which consists of 95% pure water, 2% minerals, and 3% other materials (such as leaves) collects in the tank. some water is lost through evaporation. the tank consists of a filtration process that creates a waste consisting of 8% water, 3% minerals, and 89% other materials. the drinkable water remaining after filtration consists of 98% pure water and 2% minerals. if the cows need 10,000 lb of water each week, how much rain water (by mass) must be collected weekly in the water tank?

ansver
Answers: 1

Other questions on the subject: Engineering

image
Engineering, 03.07.2019 14:10, kayabwaller4589
When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point
Answers: 3
image
Engineering, 04.07.2019 18:10, skpdancer1605
Ariver flows from north to south at 8 km/h. a boat is to cross this river from west to east at a speed of 20 km/h (speed of the boat with respect to the earth/ground). at what angle (in degrees) must the boat be pointed upstream such that it will proceed directly across the river (hint: find the speed of the boat with respect to water/river)? a 288 b. 21.8 c. 326 d. 30.2
Answers: 3
image
Engineering, 04.07.2019 18:10, mirmir62
Machinery that is a key part of the process and without which the plant or process cannot function is classifed as: (clo4) a)-critical machinery b)-essential machinery c)-general purpose machinery d)-none of the specified options.
Answers: 1
image
Engineering, 04.07.2019 18:20, maustin5323
Athin walled concentric tube exchanger is used to cool engine oil from 160°c to 60°c with water that is available at 25°c acting as a coolant. the oil and water flow rates are each at 2 kg/s, and the diameter of the inner tube is 0.5 m and the corresponding value of the overall heat transfer coefficient is 250 w/m2. oc. how long must the heat exchanger be to accomplish the desired cooling? cpwater=4.187 kj/kg-candcpengine el=2.035 kj/kg·°c, oil . 120]
Answers: 1
You know the right answer?
Alocal dairy farmer has a water tank (much like a water tower) on her farm to hold drinking water fo...

Questions in other subjects:

Konu
Arts, 06.03.2021 08:10
Konu
Mathematics, 06.03.2021 08:20