Engineering, 19.07.2019 21:20 jc2025
Air inside a piston-cylinder system is compressed from an initial pressure of 100 kpa and an initial specific volume of 2.5 m/kg to a final state during which the temperature remains constant. if the heat loss during this process is 50 kj/kg, calculate (a) the final pressure in [kpa] and (b) the final density in [kg/m ] of the air in the cylinder.
Answers: 3
Engineering, 04.07.2019 18:10, settasav9641
Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.
Answers: 3
Engineering, 04.07.2019 18:10, alyssabailey7545
Give heat transfer applications for the following, (i) gas turbines (propulsion) ) gas turbines (power generation). (iii) steam turbines. (iv) combined heat and power (chp). (v) automotive engines
Answers: 1
Engineering, 04.07.2019 18:10, michellerosas
Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.
Answers: 3
Air inside a piston-cylinder system is compressed from an initial pressure of 100 kpa and an initial...
Spanish, 31.05.2021 03:40
Mathematics, 31.05.2021 03:40
Mathematics, 31.05.2021 03:40
History, 31.05.2021 03:40
Mathematics, 31.05.2021 03:40