Engineering, 19.07.2019 21:20 wellllm

Atank contains 3l of water and is held at a constant pressure by regulated air pressure. the tank has a nozzle at the bottom with a diameter of 5mm that discharges to the atmosphere. if the tank is to be drained of water in 10 seconds, what is the minimum gage air pressure that must be provided? the tank is cylindrical and the diameter is the same as the length. a. 56 kpa b. 117 kpa c. 79 kpa d. 154 kpa

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, Tyrant4life

Draw the engineering stress-strain curve for (a) bcc; (b) fcc metals and mark important points.

Answers: 1

continue

Engineering, 04.07.2019 18:10, Larkinlover703

Items are similar to the free issue items, but their access is limited. (clo5) a)-bin stock items free issue b)-bin stock controlled issue c)-critical or insurance spares d)-rebuildable spares e)-consumables

Answers: 1

continue

Engineering, 05.07.2019 10:10, johns2380

What is the correct way to measure the overall length of a boat? measure from the tip of the bow to the highest point on the gunwale. measure from the tip of the bow in a straight line to the stern of the boat. measure from the tip of the bow in a straight line to the back seat. measure from port to starboard at the boat's widest point.

Answers: 1

continue

Engineering, 06.07.2019 02:30, piperk19

Define thermoplastic polymers and thermosetting polymers in terms of their structures, and (ii) describe briefly a process suitable for the production of products from each type of polymer.

Answers: 3

continue

You know the right answer?

Atank contains 3l of water and is held at a constant pressure by regulated air pressure. the tank ha...