Engineering, 18.07.2019 23:10 jeffhuffle17
The maximum recommended speed for a 366 mm-diameter abrasive grinding wheel is 2,038 rev/min. assume that the material is isotropic; use a bore of 25 mm, v- 0.24, and a mass density of 3,235 kg/m3; and find the maximum tensile stress at this speed. round your answer to two decimal places.
Answers: 3
Engineering, 04.07.2019 18:10, niicoleassssssf
Aflywheel accelerates for 5 seconds at 2 rad/s2 from a speed of 20 rpm. determine the total number of revolutions of the flywheel during the period of its acceleration. a.5.65 b.8.43 c. 723 d.6.86
Answers: 2
Engineering, 04.07.2019 18:20, DroctorWellsfan
Inspection for bearing condition will include: (clo4) a)-color b)-smell c)-size d)-none of the above
Answers: 1
Engineering, 04.07.2019 18:20, maciemarklin79981
A3-mm-thick panel of aluminum alloy (k 177 w/m-k, c 875 j/kg-k and ? = 2770 kg/m) is finished on both sides with an epoxy coating that must be cured at or above t,-150°c for at least 5 min. the production line for the curing operation involves two steps: (1) heating in a large oven with air at ts,0-175°c and a convection coefficient of h, 40 w/m2. k, and (2) cooling in a large chamber with air at 25°c and a con- vection coefficient of he 10 w/m2.k. the heating portion of the process is conducted over a time interval te which exceeds the ime required to reach 150°c by 5 min (h = r + 300 s). the coating has an emissivity of ? = 0.8, and the temperatures of the oven and chamber walls are 175 and 25°c, respectively. if the panel is placed in the oven at an initial temperature of 25°c and removed from the chamber at a safe-to-touch tempera ture of 37°c, what is the total elapsed time for the two-step curing operation?
Answers: 3
The maximum recommended speed for a 366 mm-diameter abrasive grinding wheel is 2,038 rev/min. assume...
Mathematics, 28.03.2020 01:15
History, 28.03.2020 01:15
Biology, 28.03.2020 01:15
Mathematics, 28.03.2020 01:15
Mathematics, 28.03.2020 01:15
Social Studies, 28.03.2020 01:15