subject
Engineering, 18.07.2019 21:30 EmmaPreston43

Steam enters a turbine operating at a steady state at 8 mpa and 700 c. the mass flow rate of the steam is 135 kg/min. the steam exits the turbine as a saturated vapor at 18 kpa. the turbine produces 2.2 mw of power. ignoring potential and kinetic energy effects determine the: rate of heat transfer from the turbine to the environment in kw rate of entropy production in kw/k for an enlarged control volume that includes the turbine and enough of its surroundings that the heat transfer occurs at the ambient temperature of 25 °c. hint! assume that the environment acts as a reservoir. what does this imply relative to the temperature?

ansver
Answers: 1

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, redrosesxx
Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux
Answers: 3
image
Engineering, 04.07.2019 18:10, caitlynnpatton1208
Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.
Answers: 3
image
Engineering, 04.07.2019 18:10, samanthabutryn
Which one from below is not one of the reasons of planning failures? (clo3) a)-planner is careless. b-planner spend less time in the field but more time on the desk c)-planner is not qualified d)-planner does not have sufficient time to properly plan
Answers: 3
image
Engineering, 04.07.2019 18:10, juansoto227711
Journeyman training is usually related (clo2) a)-to specific tasks b)-to cost analysis of maintenance task c)-to control process to ensure quality d)-to installation of machinery
Answers: 2
You know the right answer?
Steam enters a turbine operating at a steady state at 8 mpa and 700 c. the mass flow rate of the ste...

Questions in other subjects:

Konu
Mathematics, 23.08.2019 19:30