Engineering, 18.07.2019 00:40 koggebless
At a point in a machine member the stresses are σx (unknown), σy= -12 mpa and τxy=20 mpa. the allowable compressive stress at the point is 14 mpa. determine (a) the allowable tensile stress σx and (b) the principal & maximum shearing stresses in the member, orientations of principal & maximum shear planes. (c) sketch the mohr's circle representation of the state of stress and the maximum stress elements with orientations. (d) represent the stress tensors in matrix form.
Answers: 3
Other questions on the subject: Engineering
Engineering, 04.07.2019 18:10, katelynn73
Atmospheric air has a temperature (dry bulb) of 80° f and a wet bulb temperature of 60° f when the barometric pressure is 14.696 psia. determine the specific humidity, grains/lb dry air. a. 11.4 c. 55.8 d. 22.5 b. 44.1
Answers: 1
Engineering, 04.07.2019 18:20, safiyabrowne7594
Ahe-xe mixture containing a 0.75 mole fraction of helium is used for cooling electronics in an avionics application. at a temperature of 300 k and atmospheric pressure, calculate the mass fraction of helium and the mass density, molar concentration and molecular weight of the mixture. if the cooling capacity is 10 l, what is the mass of the coolant?
Answers: 3
You know the right answer?
At a point in a machine member the stresses are σx (unknown), σy= -12 mpa and τxy=20 mpa. the allowa...
Questions in other subjects:
