Engineering, 17.07.2019 23:40 kidcashdw

An air-standard dual cycle has a compression ratio of 16 and a cutoff ratio of 1.15. at the beginning of compression, p1= factor of 2.2 during the constant volume heat addition process. if the mass of air is 0.04 kg, determine 95 kpa and t 300 k. the pressure increases by a (a)-the heat addition at constant volume and at constant pressure, each in kj (b)-the net work of the cycle, in kj. (c)-the heat rejection, in kj (d)-the thermal efficiency

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, yasminothman02

An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet

Answers: 3

continue

Engineering, 04.07.2019 18:20, 1230bering

Select any two (2) areas of applications of chain-drive. (clo4) a)-permanent lubrication necessary b)-hydraulic forklift truck operation c)-rigging and heavy moving materials d)-relatively high maintenance costs e)-costlier than belt drives

Answers: 2

continue

Engineering, 04.07.2019 18:20, mjcbs21

What is the heat treatment of metals? what is the benefit of it? why and how it's useful? answer in details, do not write by hand.

Answers: 3

continue

Engineering, 04.07.2019 18:20, aly95

An engine runs on the ideal diesel cycle. the cycle has a compression ratio of 20 and a cutoff ratio of 2. the highest temperature in the cycle is 1200 k. if the heat into the system is 300 kj/kg of working fluid and using variable specific heats determine the work produced per mass of working fluid

Answers: 3

continue

You know the right answer?

An air-standard dual cycle has a compression ratio of 16 and a cutoff ratio of 1.15. at the beginnin...