Engineering, 17.07.2019 21:30 anggar20

Aparticle of mass 1kg rests on the surface of a rough plane inclined at an angle 30° to the horizontal. it is connected by a light inelastic string passing over a smooth pulley at the top of the plane to a particle of mass 5kg which is hanging freely. the coefficient of friction between the 1kg mass and the plane is %. the system is released from rest when the 5kg mass is at the height of 2m above the ground. in subsequent motion the 5kg mass hits the ground and does not rebound. before the 5kg mass hits the ground find the acceleration of the system when it is released from rest calculate the tension in the string. find also the force exerted by the string on the pulley. when the 5kg mass hits the ground determine the velocity of the two particles. after the 5kg mass hits the ground; the greatest distance travelled by the lkg mass if the pulley is of such height that the lkg mass never reaches the pulley.

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 15:10, EmilySerna

Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.

Answers: 1

continue

Engineering, 04.07.2019 18:10, abdirahmansoloman

Air is to be cooled in the evaporator section of a refrigerator by passing it over a bank of 0.8-cm-outer-diameter and 0.4-m-long tubes inside which the refrigerant is evaporating at -20°c. air approaches the tube bank in the normal direction at 0°c and 1 atm with a mean velocity of 4 m/s. the tubes are arranged in-line with longitudinal and transverse pitches of sl- st 1.5 cm. there are 30 rows in the flow direction with 15 tubes in each row. determine (a) the refrigeration capacity of this system and (b) pressure drop across the tube bank. evaluate the air properties at an assumed mean temperature of -5°c and 1 atm. is this a good assumption?

Answers: 1

continue

Engineering, 04.07.2019 18:10, DestyHilBan1183

Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.

Answers: 3

continue

Engineering, 04.07.2019 18:10, Fahaddie

The thermal expansion or contraction of a given metal is a function of the f a)-density b)-initial temperature c)- temperature difference d)- linear coefficient of thermal expansion e)- final temperature f)- original length

Answers: 2

continue

You know the right answer?

Aparticle of mass 1kg rests on the surface of a rough plane inclined at an angle 30° to the horizont...