Engineering, 16.07.2019 21:40 faith365

Two coils of wire are placed close together. initially, a current of 4.44 a exists in one of the coils, but there is no current in the other. the current is then switched off in a time of 2.96 x 10^-2 s. during this time, the average emf induced in the other coil is 4.30 v. what is the mutual inductance of the two-coil system?

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 19:10, pjgolden04

How to increase the thermal officiency of an ideal simple rankino cycle? among these methods, which one is the best and why?

Answers: 2

continue

Engineering, 04.07.2019 19:20, zoebtharpe

Heat transfer by is the fastest mode of heat transfer that requires no intervening medium. a)-conduction b)-convection c)-radiation d)-conduction and convection

Answers: 1

continue

Engineering, 04.07.2019 19:20, amcd2002

A21-tooth spur pinion mates with a 28-tooth gear. the diametral pitch is 3 teeth/in and the pressure angle is 20°, find the following values: the addendum, dedendum, circular pitch, tooth thickness, and base circle diameters.

Answers: 2

continue

Engineering, 05.07.2019 10:10, johns2380

What is the correct way to measure the overall length of a boat? measure from the tip of the bow to the highest point on the gunwale. measure from the tip of the bow in a straight line to the stern of the boat. measure from the tip of the bow in a straight line to the back seat. measure from port to starboard at the boat's widest point.

Answers: 1

continue

You know the right answer?

Two coils of wire are placed close together. initially, a current of 4.44 a exists in one of the coi...