Engineering, 13.07.2019 21:10 Damagingawsomeness2
Steam at 10 mpa, 600°c enters the first-stage turbine of an ideal rankine cycle with reheat. steam leaves the reheat section of the boiler at 500℃ the condenser pressure is 6 kpa. the quality at the exit of the second-stage turbine is 90%. find the thermal efficiency of the cycle and compare it to the carnot efficiency
Answers: 2
Engineering, 03.07.2019 15:10, brooklyn674
Apiston-cylinder with a volume of 0.25 m3 holds 1 kg of air (r 0.287 k/kgk) at a temperature of 100 c. heat transfer to the cylinder causes an isothermal expansion of the piston until the volume triples. how much heat is added to the piston-cylinder?
Answers: 3
Engineering, 04.07.2019 18:10, niyawilliams23
Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10
Answers: 1
Engineering, 04.07.2019 18:10, lerasteidl
Determine whether or not it is possible to compress air adiabatically from k to 140 kpa and 400 k. what is the entropy change during this process?
Answers: 3
Engineering, 04.07.2019 18:10, johnthienann58
Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented
Answers: 2
Steam at 10 mpa, 600°c enters the first-stage turbine of an ideal rankine cycle with reheat. steam l...
English, 20.09.2020 05:01
Computers and Technology, 20.09.2020 05:01
Chemistry, 20.09.2020 05:01
English, 20.09.2020 05:01
Law, 20.09.2020 05:01