Engineering, 12.07.2019 22:10 keyairareid7

Apipe is carrying liquid at 60 degrees c, that fluctuates in pressure from 0 to 60,000 kpa (non-capped). the inside diameter of the pipe is 20 mm and the wall thickness is 1 mm and is made out of 1095 carbon steel, has a yield strength of 813 mpa and an ultimate tensile strength of 1260 mpa. using the "modified-goodman" failure criteria and a reliability factor of 99%, determine the number of cycles till failure on the inside wall. you can assume that the pipe will have a machined surface finish.?

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, niicoleassssssf

Aflywheel accelerates for 5 seconds at 2 rad/s2 from a speed of 20 rpm. determine the total number of revolutions of the flywheel during the period of its acceleration. a.5.65 b.8.43 c. 723 d.6.86

Answers: 2

continue

Engineering, 04.07.2019 18:10, Fahaddie

The thermal expansion or contraction of a given metal is a function of the f a)-density b)-initial temperature c)- temperature difference d)- linear coefficient of thermal expansion e)- final temperature f)- original length

Answers: 2

continue

Engineering, 04.07.2019 18:20, alexis9263

Have a greater impact on maintenance productivity than any other support group. (clo5) a)-the top management b)-inventory and purchasing c)-sub-contracting d)-cmms

Answers: 2

continue

Engineering, 04.07.2019 18:20, RiverH246

Air flows over a heated plate àt a velocity of 50m/s. the local skin factor coefficient at a point on a plate is 0.004. estimate the local heat transfer coefficient at this point. the following property data for air are given: density = 0.88kg/m3 , viscosity 2.286 x 10 ^-5 kgm/s , k = 0.035w/mk ,cp = 1.001kj/kgk. use colburn reynolds analogy.

Answers: 1

continue

You know the right answer?

Apipe is carrying liquid at 60 degrees c, that fluctuates in pressure from 0 to 60,000 kpa (non-capp...