Engineering, 12.07.2019 21:30 JN02

Ahomogeneous charge spark ignition engine is to be modeled using the ideal air-standard otto cycle using variable k, 100[kpa] and 0.0005 (m2 specific heats. the temperature, pressure and volume before compression are 350 respectively. if the compression ratio is 10.09 and the peak temperature is 1500 k, calculate a. the temperature and pressure after compression b. the heat added per unit trapped mass. c. the net work per unit trapped mass. d. the thermal efficiency. e)- the trapped mass. f)- the torque developed at the crankshaft.

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, Fahaddie

The thermal expansion or contraction of a given metal is a function of the f a)-density b)-initial temperature c)- temperature difference d)- linear coefficient of thermal expansion e)- final temperature f)- original length

Answers: 2

continue

Engineering, 04.07.2019 18:10, chadatkin

Which of the following ziegler nichols tuning methods the response of the controller to a step input should exhibit an s-shaped curve? a)-open loop mode b)-closed loop mode c)-both modes (open & closed) d)-none of the modes (open & closed)

Answers: 3

continue

Engineering, 04.07.2019 18:20, moneywaydaedae

Air is compressed isentropically from an initial state of 300 k and 101 kpa to a final temperature of 1000 k. determine the final pressure using the following approaches: (a) approximate analysis (using properties at the average temperature) (b) exact analysis

Answers: 1

continue

Engineering, 04.07.2019 19:10, 592400014353

For a process taking place in a closed system containing gas, the volume and pressure relationship is pvi-constant. -1.5 bar, the process starts with initial conditions, pi = =0.03 m3 and ends with final volume, v2-0.05 m3 determine the work done by the gas.

Answers: 2

continue

You know the right answer?

Ahomogeneous charge spark ignition engine is to be modeled using the ideal air-standard otto cycle u...