Engineering, 11.07.2019 03:30 liptontea4

Estimate how long will it will take to cool a trailer filled with coke. given the ambient temperature is 20 °c and heat transfer provided by the refrigeration unit is 25kw and the drinkable temperature is 5 °c. make reasonable estimates of how much insulation is included on the walls of the truck. assume the coke cans are stacked in rows inside the truck with sufficient space for air to circulate between them. assume an air flow velocity inside the truck of 0.35 m/s. assume the sun is incident on the external surface of the truck for part of the time. indicate any assumptions you make in your analysis. take the properties of coke as: specific heat capacity 4000 j/kgk, density 1000 kg/m3 and thermal conductivity of 0.5 w/mk

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, yasminothman02

An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet

Answers: 3

continue

Engineering, 04.07.2019 18:20, samantha636

Avolume of 2.65 m3 of air in a rigid, insulated container fitted with a paddle wheel is initially at 264 k, 5.6 bar. the air receives 432 kj by work from the paddle wheel. assuming the ideal gas model with cv = 0.71 kj/kg • k, determine for the air the amount of entropy produced, in kj/k

Answers: 2

continue

Engineering, 04.07.2019 18:20, AnonymousLizard52303

A2-m rigid tank initially contains saturated water vapor at 100 kpa. the tank is connected to a supply line through a valve. steam is flowing in the supply line at 600 kpa and 300 c. the valve is opened, and steam is allowed to enter the tank until the pressure in the tank reaches the line pressure, at which point the valve is closed. a thermometer placed in the tank indicates that the temperature at the final state is 200°c. determine (a) the mass of steam that has entered the tank (b) the amount of heat transfer.

Answers: 3

continue

Engineering, 04.07.2019 19:10, kelseiroll9759

Ahelical coil spring has a mean diameter of 50 mm, a wire diameter of 5.5 mm and is wound with a pitch of 10 mm. the spring steel has an ultimate strength of 1250 mpa. find the force needed to compress the spring solid and the wire stress in this condition. state whether the spring will return to its initial length.

Answers: 1

continue

You know the right answer?

Estimate how long will it will take to cool a trailer filled with coke. given the ambient temperatur...