subject
Engineering, 05.02.2020 13:47 Niyah3406

At night, the engineer plans to release the water stored in the tank at a rate of 0.2 cubic foot/second through a 2 inch schedule 40 pipe and will hook up a hydraulic motor to power an electric generator. the plan is to operate this for 12 hours where the cheaper electricity rate of 6 cents per kwhr is possible the total energy loss through the pipes is 15 n-m/n, the hydraulic motor is known to be 70 percent efficient and the attached electric generator is known to be 80% efficient. a) determine the power removed from the fluid by the hydraulic motor b) determine the total energy removed from the fluid during the 12 hour night operation. c) determine the total energy delivered by the electric generator to the electric company. d) determine the revenue associated with the 12 hour night operation. e) determine if the business engineering plan is economically feasible.

ansver
Answers: 1

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 12:10, Ryantimes2
On a average work day more than work place firs are reorted
Answers: 1
image
Engineering, 04.07.2019 18:10, johnthienann58
Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented
Answers: 2
image
Engineering, 04.07.2019 18:10, selenamr
Ifa component is made of two or more materials with different modulus of elasticity (e), it is called a composite member and we calculate the factor·n". mention the formula for calculating n". also, ifn> 1, explain what will happen to the 1. transformed. gi) ifn 1, what will happen to the material when transformed material when
Answers: 1
image
Engineering, 04.07.2019 18:20, AnonymousLizard52303
A2-m rigid tank initially contains saturated water vapor at 100 kpa. the tank is connected to a supply line through a valve. steam is flowing in the supply line at 600 kpa and 300 c. the valve is opened, and steam is allowed to enter the tank until the pressure in the tank reaches the line pressure, at which point the valve is closed. a thermometer placed in the tank indicates that the temperature at the final state is 200°c. determine (a) the mass of steam that has entered the tank (b) the amount of heat transfer.
Answers: 3
You know the right answer?
At night, the engineer plans to release the water stored in the tank at a rate of 0.2 cubic foot/sec...

Questions in other subjects: