Engineering, 11.07.2019 02:30 neariah24

You are tasked with designing a cep cam profile for a piece of manufacturing equipment. the program should be rdfd with each event lasting 90 degrees. the peak lift should be 2". use a cycloidal function for the rise and fall events. you must submit: .an svaj diagram a cam lobe profile with a base circle of 4" .a plot of the pressure angle vs cam angle (with no eccentricity) a plot of the instantaneous pitch radius (use a 0.5" follower) a plot of the instantaneous pitch radius (use a 0.5" radius follower)

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, mm016281

What difference(s) did you notice using a pneumatic circuit over hydraulic circuit. explain why the pneumatic piston stumbles when it hits an obstacle.

Answers: 2

continue

Engineering, 04.07.2019 18:20, kendrawalraven

The characteristic roots of a dynamic system are: 1.7920 1.8160 i, -1.7920 1.8160 i, -0.4160 what is the order of this system? what are the settling time and damping ratio of the system?

Answers: 3

continue

Engineering, 04.07.2019 18:20, jessie8022

Apiston-cylinder device contains 0.1 m3 of liquid water and 0.9 m3 of water vapor in equilibrium at 800 kpa. heat is transferred at constant pressure until the temperature of water reaches 350 °c. determine (a) the quality of water at the initial state (b) the work associated with this process, (c) the heat associated with this process.

Answers: 2

continue

Engineering, 04.07.2019 18:20, cdyshaylia55

Water vapor initially at 10 bar and 400 °c is contained within a piston-cylinder assembly. the water lost heat to the surrounding according to isochoric (iso-volumetric) process until its temperature is 150 °c. the water is then condensed isothermally to saturated liquid. for the water as a system, calculate the work in kj/kg

Answers: 2

continue

You know the right answer?

You are tasked with designing a cep cam profile for a piece of manufacturing equipment. the program...