Engineering, 11.07.2019 01:30 DragonLovely

Apelton wheel nozzle, for which cy 0.97, is 400 m below the surface of a lake. the jet diameter is 80 mm, the pipe diameter is 0.6 m, its length is 4 km and f 0.032. the buckets deflect the jet through 165 and they run at 0.48 times the jet speed, bucket friction reducing the velocity at outlet by 15 percent of the relative velocíty at inlet. mechanical efficiency 90%. determine: a)-the flow rate b)-he shaft power developed by the turbine

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, cowgyrlup124

Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.

Answers: 1

continue

Engineering, 04.07.2019 18:10, Strick1530

Which of the following components of a pid controlled accumulates the error over time and responds to system error after the error has been accumulated? a)- proportional b)- derivative c)- integral d)- on/off.

Answers: 2

continue

Engineering, 04.07.2019 18:10, samanthabutryn

Which one from below is not one of the reasons of planning failures? (clo3) a)-planner is careless. b-planner spend less time in the field but more time on the desk c)-planner is not qualified d)-planner does not have sufficient time to properly plan

Answers: 3

continue

Engineering, 04.07.2019 18:10, oliviasoreo92

Compute the pressure drop of 30°c air flowing with a mean velocity of 8 m/s in a circular sheet-metal duct 300 mm in diameter and 15 m long. use a friction factor, f 0.02, and pair = 1.1644 kg/m a. 37.26 pa b. 25.27 pa n c. 29.34 pa d. 30.52 pa

Answers: 1

continue

You know the right answer?

Apelton wheel nozzle, for which cy 0.97, is 400 m below the surface of a lake. the jet diameter is 8...