subject
Engineering, 28.01.2020 11:31 mandi795

In areas where the air temperature remains below o°c for prolonged periods of time, the freezing of water in underground pipes is a major concern. fortunately, the soil remains relatively warm during those periods, and it takes weeks for the subfreezing temperatures to reach the water mains in the ground. thus, the soil effectively serves as an insulation to protect the water from subfreezing temperatures in winter. the ground at a cold location is covered with snow pack at -10°c for a continuous period of two months, and the average soil properties at that location are k 0.4 w/m-k and a 0.15 x10m/s. each pipe of the system is 30 m long with a diameter of 10 cm. assuming an initial uniform temperature of 10°c for the ground and pipe surface, determine: a) the minimum burial depth to prevent the water pipes from freezing, and b) the conduction shape factor and steady rate of heat transfer at the minimum burial depth.

ansver
Answers: 1

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, meganwintergirl
Afour cylinder four-stroke in-line engine has a stroke of 160mm, connecting rod length of 150mm, a reciprocating mass of 3kg and its firing order is 1-3-4-2. the spacing between cylinders is 100mm. i. show that the engine is in balance with regard to the primary inertia forces and primary 3. a and secondary inertia couples. li determine the out of balance secondary inertia force ii. propose ways of balancing this out of balance force and discuss the challenges that will arise
Answers: 3
image
Engineering, 04.07.2019 18:10, tobyhollingsworth178
Which from the following instrument is commonly used to detect the high pitch butzing sound in bearings? [clo4] a)-digital ultrasonic meter b)-infrared camera c)-spectroscopic d)-vibrometer
Answers: 2
image
Engineering, 04.07.2019 19:10, phantomlizz3233
In general, how do thermosetting plastics compare to thermoplastics in mechanical and physical properties?
Answers: 3
image
Engineering, 05.07.2019 04:30, kookycookiefanx
Technician a says that in a worm gear steering system, most excessive steering free play is usually found in the gearbox. technician b says that in a rack-and-pinion steering system, excessive free play can be found in the bushings. who is correct?
Answers: 2
You know the right answer?
In areas where the air temperature remains below o°c for prolonged periods of time, the freezing of...

Questions in other subjects:

Konu
Mathematics, 29.10.2019 03:31