Engineering, 30.01.2020 06:52 jibjabsalar1212
Astraight rectangular fin is attached to a wall at a temperature of 100 c to dissipate excess heat that is produced. the fin material is an integral part of the cast-iron wall (k-50 w/m-k). the surface of the fin is exposed to an ambient air temperature of 20°c and the convection coefficient is estimated to be 60 w/m-.k. the fin thickness is 2 mm and space limitations require that the width of fin be no larger than 20 cm. assuming constant material properties, one-dimensional heat transfer along the length, and an adiabatic fin tip: a) find the smallest value of the fin length l for which the temperature of the fin tip at x l does not exceed 52 °c. b) find the heat transfer rate.
Answers: 2
Other questions on the subject: Engineering
Engineering, 03.07.2019 15:10, breannaasmith1122
Two flowing streams of argon gas are adiabatically mixed to form a single flow/stream. one stream is 1.5 kg/s at 400 kpa and 200 c while the second stream is 2kg/s at 500 kpa and 100 ? . it is stated that the exit state of the mixed single flow of argon gas is 150 c and 300 kpa. assuming there is no work output or input during the mixing process, does this process violate either the first or the second law or both? explain and state all your assumptions.
Answers: 1
Engineering, 04.07.2019 03:10, lauriepdx17
What precautions should you take to prevent injuries when dealing with heavy loads?
Answers: 1
Engineering, 04.07.2019 18:10, hadellolo8839
Acompressor receives the shaft work to decrease the pressure of the fluid. a)- true b)- false
Answers: 3
You know the right answer?
Astraight rectangular fin is attached to a wall at a temperature of 100 c to dissipate excess heat t...
Questions in other subjects:
