subject
Engineering, 21.11.2019 19:31 akeemedwards12

Catalogue data for a six-cylinder refrigerant 22 compressor operating at 29 r/s (revolution per second) indicates a refrigerating capacity of 96.4 kw and a power requirement of 28.9 kw at an evaporating temperature of 5°c and condensing temperature of 50°c. the performance data are based on 3°c liquid sub-cooling and 8°c super-heating of suction gas entering the compressor. the cylinder bore (diameter) is 67mm and piston stoke is 57mm. compute: (a) the clearance volumetric efficiency if the clearance volume is 4.8% (b) the actual volumetric efficiency (c) compression efficiency 1.

ansver
Answers: 3

Other questions on the subject: Engineering

image
Engineering, 03.07.2019 14:10, kayabwaller4589
When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point
Answers: 3
image
Engineering, 04.07.2019 18:10, niicoleassssssf
Aflywheel accelerates for 5 seconds at 2 rad/s2 from a speed of 20 rpm. determine the total number of revolutions of the flywheel during the period of its acceleration. a.5.65 b.8.43 c. 723 d.6.86
Answers: 2
image
Engineering, 04.07.2019 18:20, ashleyjaslin
Derive the correction factor formula for conical nozzle i=-(1+ cosa) and calculate the nozzle angle correction factor for a nozzle whose divergence hal-fangle is 13 (hint: assume that all the mass flow originates at the apex of the cone.
Answers: 3
image
Engineering, 04.07.2019 19:10, santosbeti90
With increases in magnification, which of the following occur? a. the field of view decreases. b. the ambient illumination decreases. c. the larger parts can be measured. d. the eyepiece must be raised.
Answers: 1
You know the right answer?
Catalogue data for a six-cylinder refrigerant 22 compressor operating at 29 r/s (revolution per seco...

Questions in other subjects: