Computers and Technology, 29.11.2021 06:40 jholland03

Opening in Manhattan, NY in 6 months, you have just been given the network requirements for this business. There will be 55 employees in this office: 5 - shipping and receiving, 3 – accounting, 2 – human resources, 3 – managers, 10 – technicians, 20 – sales personnel, 10 – customer service, and 2 – marketing. Each employee will have a computer that requires network access. Cisco routing and switching infrastructure will be used and all equipment will be in one physical building. It is your job to design, configure, and implement all required network infrastructure. Create a subnet for each department and a subnet for 7 servers. Make the last usable IP address for each subnet the gateway for that subnet. Use private IPv4 addressing. Size your subnets appropriately – use the smallest prefix to accommodate the number of nodes required. Use Cisco Packet Tracer to complete this project. Objectives Design the network displaying logical segmentation, connectivity, and layout of the required devices. - Show network address and subnet prefix on each link - - Use subnets that do not overlap – -

Implement Network Infrastructure Configure a DHCP server to provide IP addresses to each department computer - -

Configure a workstation in each subnet so it has network access - -

Configure a server in the server subnet and apply a static IP address so it has full network access – -

Ensure only the subnets you have assigned to your LAN have access to the server – - -

Ensure the network is fully converged and meets infrastructure requirements - -

Ensure all computers can communicate to all nodes on the network -

Answers: 2

Show answers

Other questions on the subject: Computers and Technology

Computers and Technology, 21.06.2019 23:30, nourmaali

4.11 painting a wall (1) prompt the user to input integers for a wall's height and width. calculate and output the wall's area (integer). note that in this case there is a new line after each prompt. (submit for 1 point). enter wall height (feet): 11 enter wall width (feet): 15 wall area: 165 square feet (2) extend to also calculate and output the amount of paint in gallons needed to paint the wall (floating point). assume a gallon of paint covers 350 square feet. store this value in a variable. output the amount of paint needed using the %f conversion specifier. (submit for 2 points, so 3 points total). enter wall height (feet): 11 enter wall width (feet): 15 wall area: 165 square feet paint needed: 0.471429 gallons (3) extend to also calculate and output the number of 1 gallon cans needed to paint the wall. hint: use a math function to round up to the nearest gallon. (submit for 2 points, so 5 points total). enter wall height (feet): 11 enter wall width (feet): 15 wall area: 165 square feet paint needed: 0.471429 gallons

Answers: 3

continue

Computers and Technology, 23.06.2019 14:30, soapai

Select the correct answer. sean is a computer programmer. he has programmed an application for toddlers that plays nursery rhymes. however, a logic error has occurred in the program. which problem is a likely consequence of the error? a. the program crashes every time the user wants to play the nursery rhymes. b. the program crosses its buffer boundaries and overwrites an adjacent program. c. the program plays a different nursery rhyme than the one the user intended to play. d. the program shows different structures in its programming language code. e. the program introduces new viruses every time the user plays a nursery rhyme.

Answers: 1

continue

Computers and Technology, 24.06.2019 08:30, daskatingpanda

Formatting rows and columns is similar to cell formatting. in an openoffice calc spreadsheet, you can format data entered into rows and columns with the of the rows and columns options. you can insert rows and columns into, or delete rows and columns from, a spreadsheet. use the insert or delete rows and columns option on the insert tab. alternatively, select the row or column where you want new rows or columns to appear, right-click, and select insert only row or only column options. you can hide or show rows and columns in a spreadsheet. use the hide or show option on the format tab. for example, to hide a row, first select the row, then choose the insert tab, then select the row option, and then select hide. alternatively, you can select the row or columns, right-click, and select the hide or show option. you can adjust the height of rows and width of columns. select row and then select the height option on the format tab. similarly, select column, then select the width option on the format tab. alternatively, you can hold the mouse on the row and column divider, and drag the double arrow to the position. you can also use the autofit option on the table tab to resize rows and columns.

Answers: 1

continue

Computers and Technology, 24.06.2019 16:00, alexisbeasley2

Which of the following characters is acceptable to use in a filename? ? / – %

Answers: 1

continue

You know the right answer?

Opening in Manhattan, NY in 6 months, you have just been given the network requirements for this bus...