Your wireless network consists of multiple 802.11n access points that are configured as follows: SSID (hidden): CorpNet Security: WPA2-PSK using AES Frequency: 5.7 GHz Bandwidth per channel: 20 MHz This network is required to support an ever-increasing number of devices. To ensure there is sufficient capacity, you want to maximize the available network bandwidth. What should you do

Given a link with a maximum transmission rate of 32.8 mbps. only two computers, x and y, wish to transmit starting at time t = 0 seconds. computer x sends filex (4 mib) and computer y sends filey (244 kib), both starting at time t = 0. statistical multiplexing is used, with details as follows packet payload size = 1000 bytes packet header size = 24 bytes (overhead) ignore processing and queueing delays assume partial packets (packets consisting of less than 1000 bytes of data) are padded so that they are the same size as full packets. assume continuous alternating-packet transmission. computer x gets the transmission medium first. at what time (t = ? ) would filey finish transmitting? give answer in milliseconds, without units, and round to one decimal places (e. g. for an answer of 0.013777 seconds you would enter "13.8" without the quotes)