AYUDA DOY CORONA NECESITO ESTO AHORA, POR FAVOR NO SE LLEVEN LOS PUNTOS QUE ME CUESTAN MUCHO.

Determine which of the four levels of measurement (nominal, ordinal, interval, ratio) is most appropriate for the data below. internet speed levels of "fast comma " "medium comma " and "slow" choose the correct answer below. a. the ordinal level of measurement is most appropriate because the data can be ordered comma but differences left parenthesis obtained by subtraction right parenthesis cannot be found or are meaningless. nothing nothing nothing nothing nothing b. the interval level of measurement is most appropriate because the data can be ordered comma differences left parenthesis obtained by subtraction right parenthesis can be found and are meaningful comma and there is no natural starting point. c. the nominal level of measurement is most appropriate because the data cannot be ordered. nothing d. the ratio level of measurement is most appropriate because the data can be ordered comma differences left parenthesis obtained by subtraction right parenthesis can be found and are meaningful comma and there is a natural starting point.

You are working as a security analyst in a company xyz that owns the whole subnet range of 23.0.0.0/8 and 192.168.0.0/8. while monitoring the data, you find a high number of outbound connections. you see that ip's owned by xyz (internal) and private ip's are communicating to a single public ip. therefore, the internal ip's are sending data to the public ip. after further analysis, you find out that this public ip is a blacklisted ip, and the internal communicating devices are compromised. what kind of attack does the above scenario depict?

Usually, when we sniff packets, we are only interested certain types of packets. we can do that by setting filters in sniffing. scapy’s filter use the bpf (berkeley packet filter) syntax; you can find the bpf manual from the internet. set the following filters and demonstrate your sniffer program again (each filter should be set separately): (a) capture only the icmp packet. (b) capture any tcp packet that comes from a particular ip and with a destination port number 23. (c) capture packets comes from or to go to a particular subnet. you can pick any subnet, such as 128.230.0.0/16; you should not pick the subnet that your vm is attached to.