Zybooks c++ Lab 6.11.1

You need to design a circuit that implements the functions in the following table: s0 s1 function0 0 a + 10 1 a – b1 0 a + b1 1 a – 1s0 and s1 are 1-bit control inputs to select the function of the circuit. inputs a and b are 4-bitnumbers in 2s complement form. the output is also a 4-bit number in 2s complement form. you are allowed to use only one ttl 7483 4-bit adder to implement all the functions. but anynumber of other components (except the adder) can be used. hint: design a combinational logic circuit to modify the input b and the “carry input” of theadder depending on the control inputs s0 and s1.important: lab grade will depend on the working of the circuit & will be checked of by your labinstructor.1. is the output valid for the following input combinations: a. s0 = 0, s1 = 0, a = 7, b = 3? b. s0 = 0, s1 = 1, a = 7, b = 3? c. s0 = 1, s1 = 0, a = -4, b = -5? d. s0 = 1, s1 = 1, a = -8, b = 6? 2. what is the range of inputs (for both a and b) that will produce the valid output for all the functions?

What is estimated time of arrival (eta)? a device that measures the acceleration (the rate of change of velocity) of an item and is used to track truck speeds or taxi cab speeds a gps technology adventure game that posts the longitude and latitude location for an item on the internet for users to find a north/south measurement of position the time of day of an expected arrival at a certain destination and is typically used for navigation applications

Now, open this passage to read about fafsa requirements. describe the information you will need to provide in order to complete a fafsa. list at least three of the required documents you must include.