subject

We can cluster in one dimension as well as in many dimensions. In this problem, we are going to cluster numbers on the real line. The particular numbers (data points) are 1, 4, 9, 16, 25, 36, 49, 64, 81, and 100, i. e., the squares of 1 through 10. We shall use a k-means algorithm, with two clusters. You can verify easily that no matter which two points we choose as the initial centroids, some prefix of the sequence of squares will go into the cluster of the smaller and the remaining suffix goes into the other cluster. As a result, there are only nine different clusterings that can be achieved, ranging from {1}{4,9,...,100} through {1,4,...,81} {100}. We then go through a reclustering phase, where the centroids of the two clusters are recalculated and all points are reassigned to the nearer of the two new centroids. For each of the nine possible clusterings, calculate how many points are reclassified during the reclustering phase. Identify in the list below the pair of initial centroids that results in exactly one point being reclassified. a) 36 and 64
b) 36 and 100
c) 4 and 16
d) 4 and 81

ansver
Answers: 2

Other questions on the subject: Computers and Technology

image
Computers and Technology, 22.06.2019 09:30, eiza666
My mom and i are moving and we don’t have wifi for the next week, i want to know if using a using a hotspot with unlimited data is better than using regular wifi. i’m considering cost, speed, and data sacrifices.
Answers: 1
image
Computers and Technology, 22.06.2019 18:30, Jessieeeeey
Kto rozmawia z clamentain przez krótkofalówke w the walking dead która śledzi lee w 4 epizodzie
Answers: 1
image
Computers and Technology, 22.06.2019 19:00, dadonelson2109
If your accelerator suddenly gets stuck what should you do
Answers: 2
image
Computers and Technology, 22.06.2019 23:50, Emptypockets451
You need to design a circuit that implements the functions in the following table: s0 s1 function0 0 a + 10 1 a – b1 0 a + b1 1 a – 1s0 and s1 are 1-bit control inputs to select the function of the circuit. inputs a and b are 4-bitnumbers in 2s complement form. the output is also a 4-bit number in 2s complement form. you are allowed to use only one ttl 7483 4-bit adder to implement all the functions. but anynumber of other components (except the adder) can be used. hint: design a combinational logic circuit to modify the input b and the “carry input” of theadder depending on the control inputs s0 and s1.important: lab grade will depend on the working of the circuit & will be checked of by your labinstructor.1. is the output valid for the following input combinations: a. s0 = 0, s1 = 0, a = 7, b = 3? b. s0 = 0, s1 = 1, a = 7, b = 3? c. s0 = 1, s1 = 0, a = -4, b = -5? d. s0 = 1, s1 = 1, a = -8, b = 6? 2. what is the range of inputs (for both a and b) that will produce the valid output for all the functions?
Answers: 3
You know the right answer?
We can cluster in one dimension as well as in many dimensions. In this problem, we are going to clus...

Questions in other subjects:

Konu
English, 24.08.2019 23:30