Hey guys finishing up a little homework this is my first question so could I get a little help with this friend please​

Technician a says that a shop towel should never be used to clean around the flange area before replacing an automatic transmission filter. technician b says that a dimpled transmission fluid pan can be repaired. who is right

Me with this program in c++ ! computers represent color by combining sub-colors red, green, and blue (rgb). each sub-color's value can range from 0 to 255. thus (255, 0, 0) is bright red. (130, 0, 130) is a medium purple. (0, 0, 0) is black, (255, 255, 255) is white, and (40, 40, 40) is a dark gray. (130, 50, 130) is a faded purple, due to the (50, 50, 50) gray part. (in other word, equal amounts of red, green, blue yield gray).given values for red, green, and blue, remove the gray part. ex: if the input is 130 50 130, the output is: 80 0 80. thus, find the smallest value, and then subtract it from all three values, thus removing the gray.

:you areto design the controller for alight that functions both as an ordinary light and also as a motion activated light and alarm. a. if the manual switch s is on, then the light l is on. b. besides the manual switch, there is a motion detector, m1, which activatesthis light. c.if motion is detected but the light is on anyway because s is on, only then a secondoutput a, an alarm, is turned on. d. the disable switch, d, disables the motion activated light and alarmbut leaves manual control operation of the light using switch s.(i)read the problem statement and clearly identify the inputs and outputs for the circuit you are designing. (ii)create the truth table for this system; include the light, alarm, switch, disable, and the motion sensor.(iii)draw a schematic of this system.