What is the problem, if any, with the following code?The desired output is [3, 19]. >>> aList = [19,3]
>>> aList[0]= a List[1]
>>> aList[1] = aList[o]
>>> aList
There is no problem.

You need a temporary variable to hold the value 3

You need parentheses around 0 and 1, as in aList(o) and aList(1).

You need to import list to use a list.

Which one of the following is considered a peripheral? a software b mouse c usb connector d motherboard

State 7 common key's for every keyboard

:you areto design the controller for alight that functions both as an ordinary light and also as a motion activated light and alarm. a. if the manual switch s is on, then the light l is on. b. besides the manual switch, there is a motion detector, m1, which activatesthis light. c.if motion is detected but the light is on anyway because s is on, only then a secondoutput a, an alarm, is turned on. d. the disable switch, d, disables the motion activated light and alarmbut leaves manual control operation of the light using switch s.(i)read the problem statement and clearly identify the inputs and outputs for the circuit you are designing. (ii)create the truth table for this system; include the light, alarm, switch, disable, and the motion sensor.(iii)draw a schematic of this system.