Write a program that creates a 4 x 5 array called numbers. The elements in your array should all be random numbers between -30 and 30, inclusive. Then, print the array as a grid. For instance, the 2 x 2 array [[1,2],[3,4]] as a grid could be printed as:

1 2
3 4
Sample Output
18 -18 10 0 -7
-20 0 17 29 -26
14 20 27 4 19
-14 12 -29 25 28

Robots with telescoping arms are sometimes used to perform tasks (e. g., welding or placing screws) where access may be difficult for other robotic types. during a test run, a robot arm is programmed to extend according to the relationship r = 3 + 0.5cos(4θ) and the arm rotates according to the relationship θ=−π4t2+πt , where r is in feet, θ is in radians, and t is in seconds. use a computer program to plot the path of tip a in x and y coordinates for 0 ≤ t ≤ 4s.

Given a link with a maximum transmission rate of 32.8 mbps. only two computers, x and y, wish to transmit starting at time t = 0 seconds. computer x sends filex (4 mib) and computer y sends filey (244 kib), both starting at time t = 0. statistical multiplexing is used, with details as follows packet payload size = 1000 bytes packet header size = 24 bytes (overhead) ignore processing and queueing delays assume partial packets (packets consisting of less than 1000 bytes of data) are padded so that they are the same size as full packets. assume continuous alternating-packet transmission. computer x gets the transmission medium first. at what time (t = ? ) would filey finish transmitting? give answer in milliseconds, without units, and round to one decimal places (e. g. for an answer of 0.013777 seconds you would enter "13.8" without the quotes)

Write pseudocode to represent the logic of a program that allows the user to enter a value. the program multiplies the value by 10 and outputs the result.