Computers and Technology, 12.03.2021 15:50 yesseniaroman21

The players on a football team are all weighed on a scale. The scale rounds the weight of every player to the nearest pound. The number of pounds read off the scale for each player is called his measured weight. The domain for each of the following relations below is the set of players on the team. For each relation, indicate whether the relation is: reflexive, anti-reflexive, or neither
symmetric, anti-symmetric, or neither
transitive or not transitive
A) Player x is related to player y if the measured weight of player x is at least the measured weight of player y. No two players on the team have the same measured weight.
B) Player x is related to player y ifthe measured weight of player x is at least the measured weight of player y. There is at least one pair of players on the team who have the same measured weight. There is also at least one pair of players on the team who have different measured weights.
C) Player x is related to player y ifthe measured weight of player x is at least the measured weight of player y. All the players on the team have exactly the same measured weight.

Answers: 1

Show answers

Other questions on the subject: Computers and Technology

Computers and Technology, 21.06.2019 16:00, nancylagunas805

What does josh silverman name as the most important aspect of managing finances?

Answers: 2

continue

Computers and Technology, 22.06.2019 23:50, Emptypockets451

You need to design a circuit that implements the functions in the following table: s0 s1 function0 0 a + 10 1 a – b1 0 a + b1 1 a – 1s0 and s1 are 1-bit control inputs to select the function of the circuit. inputs a and b are 4-bitnumbers in 2s complement form. the output is also a 4-bit number in 2s complement form. you are allowed to use only one ttl 7483 4-bit adder to implement all the functions. but anynumber of other components (except the adder) can be used. hint: design a combinational logic circuit to modify the input b and the “carry input” of theadder depending on the control inputs s0 and s1.important: lab grade will depend on the working of the circuit & will be checked of by your labinstructor.1. is the output valid for the following input combinations: a. s0 = 0, s1 = 0, a = 7, b = 3? b. s0 = 0, s1 = 1, a = 7, b = 3? c. s0 = 1, s1 = 0, a = -4, b = -5? d. s0 = 1, s1 = 1, a = -8, b = 6? 2. what is the range of inputs (for both a and b) that will produce the valid output for all the functions?

Answers: 3

continue

Computers and Technology, 23.06.2019 15:30, jasssp

Write a program in plp assembly that counts up by one starting from zero (or one) inside a loop and writes this value to the leds every time the value is increased. the memory address of the leds is 0xf0200000. the table below shows the meaning and an example usage of the instructions covered in the video, plp instructions for project 1. instruction example usage meaning load immediate li $t0, 8 register $t0 is set to the value, 8. store word sw $t2, 0($t1) the value in register $t1 is used as the memory address. the value in register $t2 is copied into this memory address. add addiu $t4, $t3, 29 register $t4 is assigned the sum of 29 and the value in register $t3. jump j your_label_name the program jumps to the line following the label, "your_label_name: ". label your label name: defines a label called "your_label_name: " that can be jumped to

Answers: 2

continue

Computers and Technology, 24.06.2019 08:00, qveenvslayin

How can smart devices benefit businesses, organizations, and social communities in the global marketplace?

Answers: 1

continue

You know the right answer?

The players on a football team are all weighed on a scale. The scale rounds the weight of every play...