Write and test a MIPS assembly language program that 1. Prompts the user for a machine code of a MIPS instruction, i. e. a 32-bit binary represented in hexadecimal. Obviously, the input must be a string of 8 hexadecimal digits (the prefix '0x' is not required).
1.a If the input was an empty string exit the program.
2. Checks for the validity of the input and print an error message if an invalid string was inputted (e. g. too long, too short, contain invalid characters, etc..). The error message should tell the user the cause of the error.
3. Checks if the opcode of the instruction is one of the following:
a. Arithmetic and logical (i. e. the opcode is 0)
b. Data transfer (lw and sw only)
4. If the opcode was not one of those prints out a message telling the user that the opcode was not recognized.
5. If the opcode was recognized print out the followings:
a. Instruction format.
b. The field name and the value of each field in the instruction in hexadecimal.
For example, if the input string was '8e300008' the program should print
Instruction format:
Opcode: 0x23
Rs: 0x11
Rt: 0x10
Imm: 0x0008
6. Go back to step 1.
Run the program and test the inputs for at least one valid instruction for each instruction category listed above, and a few invalid input strings. Refer to the syllabus for submission requirements for MIPS programming assignments.

Writing a modular program in visual c++. i am new to this and not sure what i am missing. i am getting the following error: baddate. cpp: in function ‘int main()’: baddate. cpp: 50: 3: error: ‘else’ without a previous ‘if’elsehere are the instructions and code: writing a modular program in c++in this lab, you add the input and output statements to a partially completed c++ program. when completed, the user should be able to enter a year, a month, and a day. the program then determines if the date is valid. valid years are those that are greater than 0, valid months include the values 1 through 12, and valid days include the values 1 through 31.notice that variables have been declared for you. write the simulated housekeeping() function that contains the prompts and input statements to retrieve a year, a month, and a day from the user. include the output statements in the simulated endofjob() function. the format of the output is as follows: month/day/year is a valid date. ormonth/day/year is an invalid date. execute the program entering the following date: month = 5, day = 32, year = 2014. record the output of this program. execute the program entering the following date: month = 9, day = 21, year = 2002. record the output of this /* program name: baddate. cppfunction: this program determines if a date entered by the user is valid. input: interactiveoutput: valid date is printed or user is alerted that an invalid date was entered*/#include bool validatedate(int, int, int); using namespace std; int main(){// declare variablesint year; int month; int day; const int min_year = 0, min_month = 1, max_month = 12, min_day = 1, max_day = 31; bool validdate = true; // this is the work of the housekeeping() method// get the year, then the month, then the daycout< < "enter the year"< > year; cout< < "enter the month"< > month; cout< < "enter the day"< > day; // this is the work of the detailloop() method// check to be sure date is validif(year < = min_year) // invalid yearvaliddate = false; else if (month < min_month || month > max_month) // invalid monthvaliddate = false; else if (day < min_day || day > max_day) // invalid dayvaliddate = false; // this is the work of the endofjob() method// test to see if date is valid and output date and whether it is valid or notif(validdate == true); {// output statementcout<

Donnie does not have powerpoint. which method would be best for elana to save and share her presentation as is? a pdf a doc an rtf a ppt

Which of the following is not a “fatal four” event?