8.11 LAB: Contact list (C++) A contact list is a place where you can store a specific contact with other associated information such as a phone number, email address, birthday, etc. Write a program that first takes as input an integer N that represents the number of word pairs in the list to follow. Word pairs consist of a name and a phone number (both strings). That list is followed by a name, and your program should output the phone number associated with that name.

Ex: If the input is:

3 Joe 123-5432 Linda 983-4123 Frank 867-5309

Frank

the output is:

867-5309

Your program must define and call the following function. The return value of GetPhoneNumber is the phone number associated with the specific contact name.

string GetPhoneNumber(vector nameVec, vector phoneNumberVec, string contactName)

Hint: Use two vectors: One for the string names, and the other for the string phone numbers.

Write a computer program to calculate the three-phase fault current for a fault at f in figure 1.16, with the network normal, and with one line at a time removedproblems 1.1 write a computer program to calculate the three-phase fault current for a fault at f in figure 1.16, with the network normal, and with one line at a time removed 20 power system relaying from service. the positive-sequence impedance data are given in the accompanying table. use the commonly made assumption that all prefault resistance values are (1.0+j0.0) pu, and neglect all resistance values. calculate the contribution to the fault flowing through the cb b and the voltage at that bus. for each calculated case, consider the two possibilities: cb b2 closed or open. the latter is known as the stub-end fault í• figure 1.16 problem 1.1 system data for figure 1.16 from to positive sequence 0.0+j0.1 0.05j0.15 0.04 j0.2 0.01 jo. i 0.015 + j0.15 0.01 j0.19 0.01 +j0.19 0.03+j0.1 0.0+j0.08 6 6 6 from service. the positive-sequence impedance data are given in the accompanying table. use the commonly made assumption that all prefault resistance values are (1.0 + j 0.0) pu, and neglect all resistance values. calculate the contribution to the fault flowing through the cb b1, and the voltage at that bus. for each calculated case, consider the two possibilities: cb b2 closed or open. the latter is known as the “stub-end” fault.

In which phase does software coding and testing happen in the spiral model? the spiral model does not have a separate testing phase. both, software coding and testing occurs during the phase.

You need a quick answer from a coworker. the most effective way to reach your coworker is through a. cloud server b. instant message c. teleconference d. telepresence