Write a procedure ConvertToBinary that takes an input as a number from 0 to 16 (including 0 but not 16) and converts it to a binary number. The binary number should be returned as a list.

The editing of digital photos us about the same level of difficulty as editing an analog photo

You need to design a circuit that implements the functions in the following table: s0 s1 function0 0 a + 10 1 a – b1 0 a + b1 1 a – 1s0 and s1 are 1-bit control inputs to select the function of the circuit. inputs a and b are 4-bitnumbers in 2s complement form. the output is also a 4-bit number in 2s complement form. you are allowed to use only one ttl 7483 4-bit adder to implement all the functions. but anynumber of other components (except the adder) can be used. hint: design a combinational logic circuit to modify the input b and the “carry input” of theadder depending on the control inputs s0 and s1.important: lab grade will depend on the working of the circuit & will be checked of by your labinstructor.1. is the output valid for the following input combinations: a. s0 = 0, s1 = 0, a = 7, b = 3? b. s0 = 0, s1 = 1, a = 7, b = 3? c. s0 = 1, s1 = 0, a = -4, b = -5? d. s0 = 1, s1 = 1, a = -8, b = 6? 2. what is the range of inputs (for both a and b) that will produce the valid output for all the functions?

What is the primary difference between the header section of a document and the body? a. the body is displayed on the webpage and the header is not. b. the header is displayed on the webpage and the body is not. c. the tag for the body is self-closing, but the tags for the headers must be closed. d. the tag for the header is self closing, but the tag for the body must be closed.