Computers and Technology, 30.12.2020 17:10 astultz309459

You are running an 802.11g wireless router in mixed mode. You have three 802.11g wireless NICs connected to the router. A new user connects to an 802.11b wireless NIC. What will happen

Answers: 2

Show answers

Answers

Answer from: amandajbrewerdavis

Complete Question:

You are running an 802.11g wireless router in mixed mode. You have three 802.11g wireless NICs using the router. A new user connects using an 802.11b wireless NIC. What will happen?

Group of answer choices.

A. The user with 802.11b will access the network at 11Mbps while the users with 802.11g will access the network at 54 Mbps.

B. The user with 802.11b will not be able to communicate on the network.

C. The user with 802.11b will access the network at 11 Mbps. The users with 802.11g will access the network at 54 Mbps unless they are communicating with the 802.11b device,which will be at 11 Mbps.

D. All users will access the network at 11 Mbps.

Explanation:

A 802.11g is one of the wireless network standards developed by the Institute of Electrical and Electronics Engineers (IEEE) which operates on a 2.4 GHz microwave bandwidth and as a result can only transmit over a short distance. The 802.11g has a data transfer rate or throughput of 54 megabits per seconds (Mbps).

Basically, the 802.11b is a similar standard to the 802.11g wireless standard that typically allows the transmission (transfer) of data for up to 11 megabits per seconds (Mbps).

In this scenario, you are running an 802.11g wireless router in mixed mode. You have three 802.11g wireless NICs using the router. A new user connects using an 802.11b wireless NIC.

Hence, what will happen is that, all the users will access the network at 11 Mbps.

Answer from: Quest

answer; i believe the correct answer is ( a expression) plz check first.good luck

Answer from: Quest

Through the process of sedimentation,sediment is turned back to rock to form sedimentation.the process of sedimentation is: > deposition-where fragments were deposited into the river or sea under gravity or travelling agent such as wind or water. > sedimentation-the fragments deposited in the river sedimented and accumulate> compaction-the layers of fragments deposited undergoes compaction due to the weight if the upper layers> cementation-chemical substance of the fragments such as cement dissolved into the water and cement the other fragments together to form sedimentary rock.thus,cementation and compaction are the process.on the other hand, transformation only occur when a rock under goes metamorphism(compaction or extreme heat).while recrystillization occurs when a rock is melted and cooled down,which also requires metamorphism to take place.hope it !

Other questions on the subject: Computers and Technology

Computers and Technology, 22.06.2019 10:40, almaga1979orfvwo

5. illustrate how fine-line inventory classification can be used with product and market segments. what are the benefits and considerations when classifying inventory by product, market, and product/market?

Answers: 2

continue

Computers and Technology, 22.06.2019 12:40, Rententen3845

How do i get the most points, without any effort?

Answers: 2

continue

Computers and Technology, 22.06.2019 16:30, jngonzo1226

Which of the following statements best describes it careers?

Answers: 2

continue

Computers and Technology, 23.06.2019 10:00, lamanihill

Now, open this passage to read about fafsa requirements. describe the information you will need to provide in order to complete a fafsa. list at least three of the required documents you must include.

Answers: 3

continue

You know the right answer?

You are running an 802.11g wireless router in mixed mode. You have three 802.11g wireless NICs conne...