Read the following scenario: A news station is sending personnel to cover a devastating earthquake in Central America. The earthquake has destroyed the infrastructure of the region, including access to electricity, clean water, and internet access. Many major roads are impassable. Which of the following would a news station most likely do in this situation? Send a team of correspondents, camera operators, and broadcast technicians to scatter throughout the region and report on all that is happening.

Send a correspondent to travel with an international relief organization and capture photos of the devastation.

Send a correspondent, camera operator, and technical operator to the site, along with a gas powered generator to capture and send footage.

Send a correspondent to report via cell phone and a photojournalist to capture images and send them via the news station’s satellite

1. declare a constant named cents_per_pound and initialize with 25. 2. get the shipping weight from user input storing the weight into shipweightpounds. 3. using flat_fee_cents and cents_per_pound constants, assign shipcostcents with the cost of shipping a package weighing shipweightpounds.

Write a program that uses a random number generator to generate a two digit positive integer and allows the user to perform one or more of the following operations: a. double the number. b. reverse the digits of the number. c. raise the number to the power of 2, 3, or 4. d. sum the digits of the number. e. if the number is a two-digit number, then raise the first digit to the power of the second digit. f. if the number is a three-digit number and the last digit is less than or equal to 4, then raise the first two digits to the power of the last digit. after performing an operation if the number is less than 10, add 10 to the number. also, after each operation determine if the number is prime. each successive operation should be performed on the number generated by the last operation. your program should not contain any global variables and each of these operations must be implemented by a separate function. also, your program should be menu driven. 7. (fraction calculator) write a program that

Write a program in plp assembly that counts up by one starting from zero (or one) inside a loop and writes this value to the leds every time the value is increased. the memory address of the leds is 0xf0200000. the table below shows the meaning and an example usage of the instructions covered in the video, plp instructions for project 1. instruction example usage meaning load immediate li $t0, 8 register $t0 is set to the value, 8. store word sw $t2, 0($t1) the value in register $t1 is used as the memory address. the value in register $t2 is copied into this memory address. add addiu $t4, $t3, 29 register $t4 is assigned the sum of 29 and the value in register $t3. jump j your_label_name the program jumps to the line following the label, "your_label_name: ". label your label name: defines a label called "your_label_name: " that can be jumped to