Who made the first electronic device?

Problems: 1. using textbooks, reference books, and internet as your source of research, draw the following microprocessor microarchitectures i. intel 8086 ii. motorola 68000 i atmel atmega32 iv. mips single cycle v. arm cortex-m3 write an hdl module for a hexadecimal seven-segment display decoder. the input is 4-bit binary representing a hex number (0-f), and the output is 8-bit seven segment display bits (a-h). thus, the decoder must handle the digits 10 - 15 to display a-f respectively, in addition to 0-9 numbers. 2. design a 4-bit left and right rotator (both outputs). first sketch schematic diagrams of your design. then implement your design using hdl coding. 3. 4. design a modified priority encoder that receives an 8-bit input, a7: 0 and produces a 3-bit output, y2o. y indicates the most significant bit of the input that is true. y should be 0 if none of the inputs are true. give a simplified boolean equation, sketch a schematic, and write an hdl code. 5.write an 8: 1 multiplexer module called mux8 with selection inputs s, data input d, and data output y. data input (d) and data output (v) are 32-bit wide

Consider this data sequence: "3 11 5 5 5 2 4 6 6 7 3 -8". any value that is the same as the immediately preceding value is considered a consecutive duplicate. in this example, there are three such consecutive duplicates: the 2nd and 3rd 5s and the second 6. note that the last 3 is not a consecutive duplicate because it was preceded by a 7. write some code that uses a loop to read such a sequence of non-negative integers , terminated by a negative number. when the code finishes executing, the number of consecutive duplicates encountered is printed. in this case, 3 would be printed. assume the availability of a variable, stdin, that references a scanner object associated with standard input. that is, stdin = new scanner(system. in); is given.

Consider the simple 3-station assembly line illustrated below, where the 2 machines at station 1 are parallel, i. e., the product only needs to go through one of the 2 machines before proceeding to station 2.what is the throughput time of this process?