Computers and Technology, 20.11.2020 01:00 aranza78

Mha padlet rp fans im baby todoroki

Answers: 3

Show answers

Other questions on the subject: Computers and Technology

Computers and Technology, 22.06.2019 11:00, simbupls

Technician a says that the radiator usually cools better if the front air dam is removed. technician b says that when a condenser has a leak it can be repaired easily with epoxy. who is correct?

Answers: 1

continue

Computers and Technology, 23.06.2019 06:00, 573589

What machine listens for http requests to come in to a website’s domain? a. a router b. a browser c. a server d. a uniform resource locator

Answers: 1

continue

Computers and Technology, 23.06.2019 09:30, Princessirisperez0

Given a link with a maximum transmission rate of 32.8 mbps. only two computers, x and y, wish to transmit starting at time t = 0 seconds. computer x sends filex (4 mib) and computer y sends filey (244 kib), both starting at time t = 0. statistical multiplexing is used, with details as follows packet payload size = 1000 bytes packet header size = 24 bytes (overhead) ignore processing and queueing delays assume partial packets (packets consisting of less than 1000 bytes of data) are padded so that they are the same size as full packets. assume continuous alternating-packet transmission. computer x gets the transmission medium first. at what time (t = ? ) would filey finish transmitting? give answer in milliseconds, without units, and round to one decimal places (e. g. for an answer of 0.013777 seconds you would enter "13.8" without the quotes)

Answers: 3

continue

Computers and Technology, 23.06.2019 15:30, jasssp

Write a program in plp assembly that counts up by one starting from zero (or one) inside a loop and writes this value to the leds every time the value is increased. the memory address of the leds is 0xf0200000. the table below shows the meaning and an example usage of the instructions covered in the video, plp instructions for project 1. instruction example usage meaning load immediate li $t0, 8 register $t0 is set to the value, 8. store word sw $t2, 0($t1) the value in register $t1 is used as the memory address. the value in register $t2 is copied into this memory address. add addiu $t4, $t3, 29 register $t4 is assigned the sum of 29 and the value in register $t3. jump j your_label_name the program jumps to the line following the label, "your_label_name: ". label your label name: defines a label called "your_label_name: " that can be jumped to

Answers: 2

continue

You know the right answer?

Mha padlet rp fans im baby todoroki

...