The resistance in a particular kind of circuit is found using this formula: R1(R2)
R1+R2
Assuming all the variables are non-zero, which line of code will find the value of the resistance?
resistance = R1(R2) / R1 + R2
resistance = R1(R2) 7 (R1 + R2)
O resistance = (R1 R2)/(R1 + R2)
O resistance = R1(R2)/(R1 + R2)

Arectangular room is 4 meters longer than it is wide and its preimeter is 32 meters find the dimensions of the room

Assignment directions the owner of a popular local coffee shop has approached you to design a network for his business. he would like to offer his customers wifi access to the internet, but also thinks it might be handy to network the kitchen and store room together with the office computer he already uses for ordering, scheduling, and payroll. he thinks that might save him time doing inventory control and ordering. your assignment is to create a set of questions for him that will precisely define the purpose of the network and any constraints and restrictions on its implementation. assignment guidelines create a list of at least ten questions to ask your customer. of those ten questions, at least one question must come from each of the following subject areas: purpose of the network network access and security issue network availability and fault tolerance issues future expansion issues vendor issues briefly explain in two or three sentences why you would ask each question and what you expect to learn from your customer’s response. submission requirements your questions should meet the criteria of a good survey question by being specific, unambiguous, and closed-ended. all questions, as well as your explanations, should be written in proper english using correct grammar, spelling, and punctuation. use complete sentences, and do not use slang, texting abbreviations, or shortcuts.

:you areto design the controller for alight that functions both as an ordinary light and also as a motion activated light and alarm. a. if the manual switch s is on, then the light l is on. b. besides the manual switch, there is a motion detector, m1, which activatesthis light. c.if motion is detected but the light is on anyway because s is on, only then a secondoutput a, an alarm, is turned on. d. the disable switch, d, disables the motion activated light and alarmbut leaves manual control operation of the light using switch s.(i)read the problem statement and clearly identify the inputs and outputs for the circuit you are designing. (ii)create the truth table for this system; include the light, alarm, switch, disable, and the motion sensor.(iii)draw a schematic of this system.