Who is this? And guess what my profile is
...
Computers and Technology, 26.10.2020 22:30 pitmmaKaos5499
Who is this? And guess what my profile is
Answers: 1
Computers and Technology, 22.06.2019 23:50, Emptypockets451
You need to design a circuit that implements the functions in the following table: s0 s1 function0 0 a + 10 1 a – b1 0 a + b1 1 a – 1s0 and s1 are 1-bit control inputs to select the function of the circuit. inputs a and b are 4-bitnumbers in 2s complement form. the output is also a 4-bit number in 2s complement form. you are allowed to use only one ttl 7483 4-bit adder to implement all the functions. but anynumber of other components (except the adder) can be used. hint: design a combinational logic circuit to modify the input b and the “carry input” of theadder depending on the control inputs s0 and s1.important: lab grade will depend on the working of the circuit & will be checked of by your labinstructor.1. is the output valid for the following input combinations: a. s0 = 0, s1 = 0, a = 7, b = 3? b. s0 = 0, s1 = 1, a = 7, b = 3? c. s0 = 1, s1 = 0, a = -4, b = -5? d. s0 = 1, s1 = 1, a = -8, b = 6? 2. what is the range of inputs (for both a and b) that will produce the valid output for all the functions?
Answers: 3
Computers and Technology, 23.06.2019 09:30, shadowsnake
Write a function called checkfactor that takes two arrays of positive numbers, firstnumberrow and secondnumberrow. checkfactor checks if the first entry in firstnumberrow is divisible by the first entry in secondnumberrow, and performs the same operation on the next array elements until all entries have been checked. all the numbers are positive and the number of entries in the arrays are the same. the function should return the identified divisible numbers in two row arrays named firstdivisible and seconddivisible. restrictions: branches or loops should not be used. the code must use the internal mod and logical functions. hint: the mod function should be used to determine if two numbers are divisible. ex: for num1 and num2 if mod(num1,num2) is 0, then the two numbers are divisible. this is matlab
Answers: 2
History, 30.08.2020 02:01
Spanish, 30.08.2020 02:01
Mathematics, 30.08.2020 02:01
Mathematics, 30.08.2020 02:01
Mathematics, 30.08.2020 02:01
Mathematics, 30.08.2020 02:01