A full adder can be built from 2 half adders and an OR gate. The following verilog code show a hierarchical description of such a full-adder built from 2 half adders and an OR gate. Fill in the blanks. module half_adder(x, y,s, c);

input x, y;
output s, c;
xor(s, x,y);
and(c, x,y);
endmodule
//Full adder verilog module
//a, b, cin(carry-in) are the inputs to the full adder
//s(sum) and cout(carry out) are the outputs of the full adder
//The sum of half adder1 is s1 and carry is c1
//The sum of half adder2 is s and carry is c2
module full_adder(a, b,cin, s,cout);
input a, b,cin;
output s, cout;
wire s1,c1,c2;
half_adder ha1(a, b,(),c1);
half_adder ha2(cin, s1,s,());
or((),c1,c2);
endmodule

Ryan is working on the layout of her web page. she needs to figure out where her header, navigation bar, text, and images should go. what technique can her?

:you areto design the controller for alight that functions both as an ordinary light and also as a motion activated light and alarm. a. if the manual switch s is on, then the light l is on. b. besides the manual switch, there is a motion detector, m1, which activatesthis light. c.if motion is detected but the light is on anyway because s is on, only then a secondoutput a, an alarm, is turned on. d. the disable switch, d, disables the motion activated light and alarmbut leaves manual control operation of the light using switch s.(i)read the problem statement and clearly identify the inputs and outputs for the circuit you are designing. (ii)create the truth table for this system; include the light, alarm, switch, disable, and the motion sensor.(iii)draw a schematic of this system.

Auser is given read permission to a file stored on an ntfs-formatted volume. the file is then copied to a folder on the same ntfs-formatted volume where the user has been given full control permission for that folder. when the user logs on to the computer holding the file and accesses its new location via a drive letter, what is the user's effective permission to the file? a. read b. full control c. no access d. modify e. none of the above