Hey anything on robotics

Usually, when we sniff packets, we are only interested certain types of packets. we can do that by setting filters in sniffing. scapy’s filter use the bpf (berkeley packet filter) syntax; you can find the bpf manual from the internet. set the following filters and demonstrate your sniffer program again (each filter should be set separately): (a) capture only the icmp packet. (b) capture any tcp packet that comes from a particular ip and with a destination port number 23. (c) capture packets comes from or to go to a particular subnet. you can pick any subnet, such as 128.230.0.0/16; you should not pick the subnet that your vm is attached to.

Write a program that uses a random number generator to generate a two digit positive integer and allows the user to perform one or more of the following operations: a. double the number. b. reverse the digits of the number. c. raise the number to the power of 2, 3, or 4. d. sum the digits of the number. e. if the number is a two-digit number, then raise the first digit to the power of the second digit. f. if the number is a three-digit number and the last digit is less than or equal to 4, then raise the first two digits to the power of the last digit. after performing an operation if the number is less than 10, add 10 to the number. also, after each operation determine if the number is prime. each successive operation should be performed on the number generated by the last operation. your program should not contain any global variables and each of these operations must be implemented by a separate function. also, your program should be menu driven. 7. (fraction calculator) write a program that

Where can page numbers appear? check all that apply. in the header inside tables in the footer at the bottom of columns at the top of columns