subject

How do you report someone on

ansver
Answers: 1

Other questions on the subject: Computers and Technology

image
Computers and Technology, 22.06.2019 22:30, hmontalvo22
Who needs to approve a change before it is initiated? (select two.) -change board -client or end user -ceo -personnel manager -project manager
Answers: 1
image
Computers and Technology, 22.06.2019 23:50, Emptypockets451
You need to design a circuit that implements the functions in the following table: s0 s1 function0 0 a + 10 1 a – b1 0 a + b1 1 a – 1s0 and s1 are 1-bit control inputs to select the function of the circuit. inputs a and b are 4-bitnumbers in 2s complement form. the output is also a 4-bit number in 2s complement form. you are allowed to use only one ttl 7483 4-bit adder to implement all the functions. but anynumber of other components (except the adder) can be used. hint: design a combinational logic circuit to modify the input b and the “carry input” of theadder depending on the control inputs s0 and s1.important: lab grade will depend on the working of the circuit & will be checked of by your labinstructor.1. is the output valid for the following input combinations: a. s0 = 0, s1 = 0, a = 7, b = 3? b. s0 = 0, s1 = 1, a = 7, b = 3? c. s0 = 1, s1 = 0, a = -4, b = -5? d. s0 = 1, s1 = 1, a = -8, b = 6? 2. what is the range of inputs (for both a and b) that will produce the valid output for all the functions?
Answers: 3
image
Computers and Technology, 24.06.2019 04:30, LouieHBK
Fall protection, confined space entry procedures, controlled noise levels, and protection from chemical hazards are some of the things that contribute to a safe and
Answers: 1
image
Computers and Technology, 24.06.2019 12:50, neptunesx
Write a new lc-3 trap subroutine (i. e. a subroutine that will be invoked via the trap instruction) that will receive a numeric digit entered at the keyboard (i. e. an ascii character), echo it to the screen, and return in r0 the corresponding numeric value: so if the user types the digit '7', the character '7' will appear on the screen, but the value returned in r0 will be b0000 0000 0000 0111 (#7) you may not use any trap calls in your code - you must implement the "polling" code that interrogates the keyboard status and data registers. ; getnum_tsr ; a subroutine for obtaining a numeric value ; given ascii numeric digit input to keyboard. ; the numeric digit is echoed to the console (e. g. '7' = b0000 0000 0011 0111), ; but the value returned in r0 is the actual numeric value ; corresponding to the digit (e. g. b0000 0000 0000 0111 =
Answers: 3
You know the right answer?
How do you report someone on...

Questions in other subjects:

Konu
Mathematics, 24.02.2021 15:30
Konu
Mathematics, 24.02.2021 15:30